Welcome Guest: Login | It is currently Sat Jan 20, 2018 4:14 am

Board index Development & Design Boat Construction 4mm Ply Glass Weight

Moderator: Sabre


4mm Ply Glass Weight

Postby J_delabere on Tue Dec 12, 2017 6:16 pm

Hi All,

There has been previous discussions on fiberglassing the bottom panels of timber Sabres. Most people suggest 2 Oz. Cloth which when I convert to gsm is about 65 gsm? This sounds very light? Is this correct?

Cheers,

James
J_delabere
 
Posts: 1
Joined: Tue Dec 12, 2017 6:08 pm

Re: 4mm Ply Glass Weight

Postby csim on Sun Jan 07, 2018 6:22 pm

Hi James

I just had my first few sails in my newly built Sabre (2074) which was constructed with 4mm hoop ply and 2oz glass inside and out. The hull seems fine, no sense of it not being rigid enough, or that I am going to put a foot through it.Pretty sure this the same combo as much larger Jarcats etc.

Cheers Chris
csim
 
Posts: 9
Joined: Fri Nov 18, 2016 10:25 pm
Location: Canberra


Return to Boat Construction

Who is online

Users browsing this forum: No registered users and 2 guests

cron