Welcome Guest: Login | It is currently Wed Oct 18, 2017 1:04 pm

Board index Development & Design Rigs & Sails Boom Vang

Moderator: Sabre


Boom Vang

Postby Floriana on Mon Oct 17, 2005 4:06 pm

Hi all, Am enjoying the boat immensely. hav revarnished the deck, rudder blade and Board. Went for a sail at the APYC opening day and the old girl performed quite well.

Does anyone have an opinion on the best vang setup? I want to keep it simple if possible.

Thanks
Floriana
 

Vangs

Postby Guest on Tue Oct 18, 2005 12:00 pm

Most people (myself included) seem happy with the 4:1 purchase between mast and boom with a 2:1 (or slightly less due to angle-of-pull) twin-ended control line out to cleats just in front of the bulkhead. Have a wander around the rigging area and see how others have their controls rigged - most will be happy to talk to you about how good their systems are.

In spite of having expensive cam cleats on my No.1 boat, I do favour the ClamCleat Alloy Junior Mk 2 as being more reliable, cheaper (about 60% less than cam cleats) and incorporating its own fairlead.

Most people seem to favour low stretch (Kevlar and the like) control lines, but, providing you don't use 3mm nylon blind cord, 6mm polyester should do: it has always worked fine for me - after all, you can always pull it on a bit, and you'll save 50%!

WARNING: Take care when mounting the cleats on the deck that (a) you mount them with bolts not self tappers; and (b) you ensure that there is a reinforcing pad under the deck and use generously sized washers.

Mike 1682
Guest
 

Postby Guest on Tue Oct 18, 2005 12:51 pm

if you have a email address i have a few photos that i can send from adelaide boats that i took to set my boat up.

Regards

Ron Fry
CRISPY 1201
Guest
 

Boom Vang

Postby Floriana on Tue Oct 18, 2005 4:32 pm

Thank you both for your informative replies. My email address is denis.flores@unswalumni.com

Floriana
Floriana
 


Return to Rigs & Sails

Who is online

Users browsing this forum: No registered users and 1 guest