Welcome Guest: Login | It is currently Mon Oct 23, 2017 8:43 pm

Board index Development & Design Boat Construction Trailer

Moderator: Sabre


Trailer

Postby Damien Lovell on Fri Nov 07, 2008 10:56 pm

Hi everyone,

Does anyone have or know where I could get my hands on plans or some good pics and dimensions for a trailer/dolly combination trailer? A friend is happy to build it for me but I need a basis to start the project.

If this is not available, is it McKay Multilink trailer that is suitable for the Sabre? Any idea of which model? Cost? If I call do they know what a Sabre is???

Thanks

Damien
Damien Lovell
 
Posts: 11
Joined: Tue Jan 03, 2006 10:23 pm

Trailers for Sabres

Postby Mike Simpson on Sun Nov 09, 2008 5:34 pm

Damien

Nice to hear the boat is coming up to launch.

The Mackay Multilink trailers and dollies seem to be popular with Sabre people but many build their own others adapt box trailers (be aware that a 6x4 box is too small to drop a Sabre inside and a 7 or 8 foot by 5 foot box is better.)

Box trailers tend to have suspension that is too rough but may be adapted/adjusted.

I believe the Mackay dolly requires improvement to the beds the boat sits on before you should trust your prode & joy to it.

John Dixon at Iecon builds a nice dolly (Alloy, timber and FRP) as do Frecheville Heaney (Mostly timber).

I built my own slide-on dolly from 50mmx50mm aluminium box section and it works well but it cost $500 plus for materials. There are some very clever dollies around, particularly with regard to use of adjustable locations for the wheels to improve balance on the beach.

You're welcome to come out to Box Hill to look at mine. I think I have the overall dimensions pretty right even if the build quality lacks a bit.

Alternatively come down to Albert Sailing Club about 1300 hrs on a Saturday - most of the Laser, Impulse dollies would adapt for a Sabre. Buster Hooper at Jolly Roger quotes about $2400 for a Mackay trailer and dolly for a Laser (You dont want a regular Laser dolly with the gunwale support system!)

If you know someone who can weld aluminium you're ahead before you start.

Regards
Mike Simpson (9899 7410)
Mike Simpson
 
Posts: 80
Joined: Thu Apr 28, 2005 9:51 am
Location: Melbourne

Postby DavidG on Wed Nov 19, 2008 6:37 pm

Mike, you mention that the Mackay trolley requires improvement to the beds. But how do you change them? Do you have to replace the beds completely? And how do you get the curve right? My guess is that you have to make a template somehow (cardboard?). Any tips on how to do it?
DavidG
 
Posts: 21
Joined: Mon Dec 03, 2007 10:33 am
Location: Australia

Pattern for Beach Trolleys

Postby Mike Simpson on Wed Nov 19, 2008 8:15 pm

If you chase down this thread you will find a few suggestions about how this might be done. Steve Early has some ideas as have others. See how you go.
Mike Simpson
 
Posts: 80
Joined: Thu Apr 28, 2005 9:51 am
Location: Melbourne

Postby A Trace of Blue - 1666 on Sun Dec 07, 2008 8:29 pm

Damien,

I built my own Dollys using 32mm sqr stainless tube.

I you are interested, I can take some pics and email them to you. plus dimensions.

The road trailer was custom made to fit the dolly.

Regards . . .

willy6664@bigpond.com
Peter Wilcox
1666 - A Trace of Blue

God Still Sails a Payne-Mortlock Sailing Canoe!
A Trace of Blue - 1666
 
Posts: 43
Joined: Wed Nov 30, 2005 10:16 pm
Location: Bittern - Victoria


Return to Boat Construction

Who is online

Users browsing this forum: No registered users and 0 guests