Welcome Guest: Login | It is currently Tue Oct 24, 2017 11:36 am

Board index Development & Design Boat Construction Where/How to Stiffen Timber Hull

Moderator: Sabre


Where/How to Stiffen Timber Hull

Postby waynet on Wed Sep 17, 2014 8:33 pm

Hi to all, I am looking into doing my first build and read that having a stiff timber hull is important for performance. Are there any suggestions and tips on where and how to stiffen up a timber hull? Thanks in advance.
waynet
 
Posts: 14
Joined: Thu Jul 17, 2014 6:21 pm

Re: Where/How to Stiffen Timber Hull

Postby magic232 on Wed Sep 17, 2014 8:52 pm

Hello Waynet.

With my limited knowledge and interpretation of the construction guide, stiffening will be limited to glassing your proposed hull inside and out as I have done. I used 86gm glass mat (2oz) to do this. I'm not sure there is any other way. Good luck with your build should you head this way.
Regards John
magic232
 
Posts: 48
Joined: Sun Jan 11, 2009 6:52 pm
Location: Australia

Re: Where/How to Stiffen Timber Hull

Postby Aten on Fri Sep 19, 2014 7:24 pm

To get a light and stiff boat it seems to be accepted that only the lightest timbers can be used so more stiffening can be added. Minimising glue and trimming excess timber where ever possible seems to be the norm. I have never built a ply sabre. I am only going on anecdotal evidence. Someone that is in the know tells me that the sort of ply needed to achieve best results is virtually impossible to get in this country.
Craig
Aten
 
Posts: 87
Joined: Sun Nov 03, 2013 11:39 pm


Return to Boat Construction

Who is online

Users browsing this forum: No registered users and 1 guest

cron