Welcome Guest: Login | It is currently Tue Nov 21, 2017 2:31 am

Board index Development & Design Boat Construction Tips for redecking.

Moderator: Sabre


Tips for redecking.

Postby Julian on Fri Feb 06, 2015 10:38 pm

Does anyone have any advice in re-decking my boat? I'm not sure in how to remove the old deck without too much damage to bulkheads and stringers.
Cheers Julian
Julian
 
Posts: 5
Joined: Mon Aug 11, 2014 12:09 am

Re: Tips for redecking.

Postby HelterSkelter on Sat Feb 07, 2015 1:24 pm

Hi Julian

Please send me your email address and I will reply to you.

Alan Wilson
anw4@bigpond.com
HelterSkelter
 
Posts: 20
Joined: Mon Feb 03, 2014 8:44 am

Re: Tips for redecking.

Postby harold on Sun Feb 08, 2015 10:43 pm

Hi Julian

I use a hand router. Set the dpeth of the cut exactly to the thickeness of the ply and you can run the router all around the edges. You can then run it across the deck to reveal the stringers and bulkheads. You can also use the router to strip off the gunwhale before removing the deck. I don't use any nails to put the deck down. Just clamp the outer edge and use battens across the boat to wedge down the inner edge of the deck.

Harold
Vic State measurer
harold
 
Posts: 22
Joined: Wed Aug 05, 2009 1:05 pm
Location: Australia


Return to Boat Construction

Who is online

Users browsing this forum: No registered users and 0 guests

cron