Welcome Guest: Login | It is currently Mon Dec 11, 2017 8:19 pm

Board index Development & Design Boat Construction Botterill Sabre bulkhead replacement

Moderator: Sabre


Botterill Sabre bulkhead replacement

Postby Ilan on Tue Feb 02, 2016 6:13 pm

I'm wondering if anyone has experience replacing the wooden bulkhead under the mast step on a Botterill fibreglass Sabre?

The bulkhead on my Sabre is rotting and needs replacement but access is limited to the two inspection hatches in the front bulkhead.

It looks like I'll need to cut two large holes in the fibreglass either side of the mast step but any advice would be greatly appreciated.

Cheers
Ilan
Soriaya 1360
Soriaya 1360
Ilan
 
Posts: 4
Joined: Thu Jan 07, 2010 12:34 pm
Location: Queensland

Re: Botterill Sabre bulkhead replacement

Postby harold on Tue Feb 16, 2016 9:14 pm

Hi Ilan
I see you haven't had much help. I've never tried it but I think you should be able to do it by using a build up of narrow sections small enough to pass through the inspection hatches. I know some professionals glass the deck on that way so the mast support should be possible. You would glass the sections in place with a slight overlap so that the whole thing becomes one stiff panel. For the top of the panel try putting the resin on first then applying the glass to it. It might work well for the ends too.
All the Best
Harold Medd
harold
 
Posts: 22
Joined: Wed Aug 05, 2009 1:05 pm
Location: Australia

Re: Botterill Sabre bulkhead replacement

Postby Aten on Sun Feb 21, 2016 1:02 pm

Just saw this post. I think Harold is on the money. With careful planning you should be able to pass ply through the inspection ports. Removing the inspection ports will give you more room and you could possibly upsize them too. Cutting holes is an option but unless you know what you are doing it probably won't look pretty when you are done. I build fibreglass Sabres so if you want advice give me a call. Craig 0417172453. Where abouts are you located?
Aten
 
Posts: 87
Joined: Sun Nov 03, 2013 11:39 pm


Return to Boat Construction

Who is online

Users browsing this forum: No registered users and 0 guests

cron