Boom Vang Plate

Home › Forums › Development & Design › Rigs & Sails › Boom Vang Plate

  • This topic has 3 replies, 3 voices, and was last updated 19 years ago by Anonymous.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 13, 2006 at 12:22 am #6813
    heymacaulay
    Keymaster

    The laser fitting would be legal but I think the Holt Allen would be a better fit.

    Phillip Johnson
    National Measurer

    February 13, 2006 at 6:46 am #6814
    Anonymous
    Inactive

    Thanks Phillip

    I will find a suitable supplier. Do you know what the part number is?

    Regards

    Nic

    November 1, 2006 at 4:42 am #6815
    Anonymous
    Inactive

    The best part for this application is RWO, R4870 vang plate and R4861 angle key. The reason that I say this is the fitting has 4 attachment holes which are located on the widest part of the boom resulting in total shear load. The more important reason is that these parts are readily available and relatively cheap.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Rigs & Sails’ is closed to new topics and replies.